ATR28SS turbochargers uses our customized billet compressor wheels, engineered for high performance SR20det or majority of 4 cyclinder 1.5~2.5L engines. There are total of four different options available, rating from 350HP to 500HP based in .64 and .86 turbine housings. Please do note there is a 3mm differences in between T25 and T28 housings in two of the dump studs, most aftermarket dump pipes does allow the extra clearance, incase of factory dump pipes, about 1.5mm might needs to be filled.
The ATR828SS2 is a 500HP rated internally turbocharger with wastegate pressure sit at 20psi. Means this turbocharger will work with a minimum of 20psi of boost pressure in a free flow system and keeps on making power till 25psi, Please reference to dyno reading section.
This turbocharger must work with an fully operational blow off valve (BOV).
The leading time to build is up to 10 working days.
|Key Benefits||360 degrees Thrust bearing Heat treated steel wheels and shaft Suitable for High Boost applications|
|Warranty||HyperGear turbochargers comes with 12 month unlimited KMs warranty on all components supplied. This warranty does not cover failures cased from foreign objects or oil related issues.|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: